锂铅合金释氚实验研究

由于锂铅合金因具有高增殖比、低活泼性和可能作为冷却剂的特点,被认为是最有潜力的能源堆包层氚增殖材料。在理论模型描述熔融锂铅合金氚释放行为的基础上,开展了中子辐照后Li₁₇Pb₈₃合金的离线氚释放实验。结果表明: 释放氚的化学形式99％以上为难溶于水的成分（HT或T2）; 氚滞留时间随载气中氢分压的增加而减小,氢分压达到1000 Pa后变为常数,且与实体积无关;氚释放速率对温度的依赖性符合Arrhenius定律。以此为基础得到的氚在熔融锂铅中的动力学参数结果,虽与文献值有差异,但同样证明了在633—973 K的范围内, 氚从液态锂铅到气相的整个释放过程中起决定作用的是氚在合金内的扩散和气\|液界面的多相反应重组。Lithium\|lead alloy is considered to be one of the most prominent tritium breeding materials for the fusion reactor blanket because of its high breeding ratio, and low reactivity and possible use as coolant. An out\|of\|pile experiment of tritium release from Li₁₇Pb₈₃ alloy was performed after neutron irradiation on the base of mathematical model to describe tritium release behavior from an eutectic lithium\|lead alloy. The results suggest that the dominant chemical form of the released tritium (>99%) was the water\| insoluble component (HT or T2). Tritium residence time decreased with increasing H₂pressure in carrier gas up to 1000 Pa, and above this concentration limit it became constant and not influenced by the plenum volume. The temperature dependence of the tritium release rate can be described by an Arrhenius law. Consequently, the present results on the kinetic parameters of tritium in molten Li₁₇Pb₈₃alloy are considered to be different from the values in literature, but it is the same that the overall release process is governed by the diffusion of tritium atoms in the Li₁₇Pb₈₃and by the heterogeneous reaction at the gas\|eutectic interface of the tritium atom recombination at temperatures from 633 to 973 K.     

Recent progress of computational investigation on anode materials in Li ion batteries

Computations have been widely used to explore new Li ion battery materials because of its remarkable advantages. In this review, we summarize the recent progress on computational investigation on anode materials in Li ion batteries. By introducing the computational studies on Li storage capability in carbon nanotubes, graphene, alloys and oxides, we reveal that computations have successfully addressed many fundamental problems and are powerful tools to understand and design new anode materials for Li ion batteries.     

Three‐dimensional imaging of chemical phase transformations at the nanoscale with full‐field transmission X‐ray microscopy

The ability to probe morphology and phase distribution in complex systems at multiple length scales unravels the interplay of nano‐ and micrometer‐scale factors at the origin of macroscopic behavior. While different electron‐ and X‐ray‐based imaging techniques can be combined with spectroscopy at high resolutions, owing to experimental time limitations the resulting fields of view are too small to be representative of a composite sample. Here a new X‐ray imaging set‐up is proposed, combining full‐field transmission X‐ray microscopy (TXM) with X‐ray absorption near‐edge structure (XANES) spectroscopy to follow two‐dimensional and three‐dimensional morphological and chemical changes in large volumes at high resolution (tens of nanometers). TXM XANES imaging offers chemical speciation at the nanoscale in thick samples (>20 µm) with minimal preparation requirements. Further, its high throughput allows the analysis of large areas (up to millimeters) in minutes to a few hours. Proof of concept is provided using battery electrodes, although its versatility will lead to impact in a number of diverse research fields.     

Effect of C60 ion sputtering on the compositional depth profiling in XPS for Li(Ni,Co,Mn)O2 electrodes

The performance of a Li-ion cell strongly depends on the solid-electrolyte interface (SEI) on electrodes. The depth distribution of composition in SEI is normally determined by means of X-ray Photoelectron Spectroscopy (XPS) via Ar ion sputtering. Recently, a new kind of ion gun using C60 ions as sputtering source was introduced. In this report, a comparison between the effects of these two kinds of ion guns on the quantification of Li(Ni,Co,Mn)O₂ electrodes was made. It was found that the C60 ion gun is more suitable for analyzing the composition and chemical state of Li(Ni,Co,Mn)O₂ electrode since that it causes lower chemical damage in the superficial layer.     

DC3 and Li–Yorke chaos

There are three versions of distributional chaos, namely DC1, DC2 and DC3. By using an example of constant-length substitution system, we show that DC3 need not imply Li–Yorke chaos. (In this paper, chaos means the existence of an uncountable scrambled set of the corresponding type, while the existing example only deals with a single pair of points.)     

Precise determination of lithium isotopes in seawater using MC-ICP-MS

Li (lithium) isotope analysis using MC-ICP-MS is a very powerful tracer measurement method. This is widely used for identification of Li isotopes in many fields of study. This useful method, however, has an effect on the natural Li isotope background. This is impacted by the instrument matrix. In this study, we show that the MC-ICP-MS condition is characterized by both a low baseline background and a high-sensitivity distance at Ar plasma condition. In addition, the Li isotope ratio was measured by the use of experimental conditions that were superior to both the general plasma condition and those used in other studies. The samples were subjected to both acid leaching and a cation exchange resin (Bio-Rad AG 50 W-X8 200–400 mesh) modified for seawater samples. The isotope variations were corrected using the bracket method, the measured Li isotope ratio of sample, and the mean ratios of the L-SVEC standard (NIST L-SVEC Li₂CO₃) measured before and after the sample run. The isotope variation was presented as the deviation (per mil) of the measured ratio from that of the recommended value.     

一类高次多项式系统极限环的存在性和唯一性

通过变换将一类高次多项式系统转化为广义Liénard系统,并利用广义Liénard系统的结果研究了其极限环存在性问题,推广了相关文献的结果.     

Site specific effects in alloy surface reactivity probed by Li ions

We investigated site specific reactivity of the α-Cu-Al(17 at.%)(1 0 0) alloy surface versus that of Al and Cu by measuring neutralisation of Li⁺ ions. Experiments show that Li⁺ neutralisation on the α-CuAl(1 0 0) alloy surface does not occur efficiently on Al and is somewhat more efficient on Cu as compared to a pure Cu sample, indicating depletion of electron density on Al and transfer to neighboring Cu. It can thus be concluded that Cu sites in presence of Al are more reactive in the sense that processes involving electron capture from the surface would proceed more efficiently on these.     

Competition between halogen bond and hydrogen bond in complexes of superalkali Li3S and halogenated acetylene XCCH (X = F,Cl, Br,and I)

Complexes of superalkali Li₃S and XCCH (X = F, Cl, Br, and I) have been studied with theoretical calculations at the MP2/aug‐cc‐pVTZ level. Three types of structures are found: (A) the X atom combines with the S atom through a halogen bond; (B) the X atom interacts with the π electron of Li₃S by a π halogen bond; (C) the H atom combines with the S atom through a hydrogen bond. For A and B, a heavier halogen atom makes the interaction stronger, while for C, the change of interaction energy is not obvious, showing a small dependence on the nature of the X atom in HCCX. A is more stable than B and their difference in stability decreases as X varies from Cl to I. For the F and Cl complexes, A is weaker than C, however, the former is stronger than the latter in the Br and I complexes. The above three types of interactions have been analyzed by means of electron localization function, electron density difference, and energy decomposition, and the results show that they have similar nature and features with conventional interactions. © 2014 Wiley Periodicals, Inc.     

Li3V2（PO4）3/C正极材料在不同电压区间的电化学行为及容量衰减原因

采用溶胶-凝胶法制备锂离子电池正极材料Li3V2(PO4)3/C.通过恒电流充放电测试、循环伏安(CV)、电化学阻抗谱(EIS)等方法,研究了Li3V2(PO4)3/C在不同电压区间的电化学行为(3.0-4.5 V和3.0-4.8 V).结果表明,3.0-4.8 V电压区间的循环性能和倍率性能均不及3.0-4.5 V电压区间的.3.0-4.5 V区间0.1C (1C=150 mA?g-1)倍率首次放电比容量为127.0 mAh?g-1,循环50次后容量保持率为99.5%,而3.0-4.8 V区间的分别为168.2 mAh?g-1和78.5%.经过高倍率测试后再回到0.1C倍率充放电,3.0-4.5 V和3.0-4.8 V的放电比容量分别为初始0.1C倍率的99.0%和80.7%.经过3.0-4.8 V电压区间测试后,少部分第三个锂离子能够在低于4.5 V的电压脱出,使3.0-4.5 V电压区间的放电比容量提升了7.4%. CV结果表明3.0-4.8 V区间的容量损失主要表现为第一个锂离子的不可逆损失.极片的X射线衍射(XRD)和X射线光电子能谱(XPS)分析测试结果表明经过3.0-4.8 V测试后, Li3V2(PO4)3的结构发生了轻微的改变.电感耦合等离子体(ICP)测试结果表明循环后的电解液中含有少量的V.结构变形和V溶解可能是Li3V2(PO4)3在3.0-4.8 V区间容量衰减的主要原因.